G80 3mm me te 2mm Piauaua Wehenga Wehewehenga Tiini Hiko Hiko Tiaki Tiaki Tiaki Tiaki Tiaki Tiaki Tiaki Tiaki Hiko
Kāwai
Te hiki me te whiu, te hiki mekameka,mekameka hono poto, hiki i te mekameka hono porotaka,Koeke T mekameka, Koeke DAT mekameka,Koeke DT mekameka, DIN EN 818-7mekameka hono poto mo nga kaupapa hiki,he mekameka hoist pai,mekameka maitai koranu
Taupānga
G80 3mm me te 2mm Piauaua Wehenga Wehewehenga Tiini Hiko Hiko Tiaki Tiaki Tiaki Tiaki Tiaki Tiaki Tiaki Tiaki Hiko
Te hiki me te whiu, te hiki, te here
Whakaaturanga 1: he mekameka / hononga hono
Kī
| 1 | Whakawhitihia te raina waenganui o te hononga | l | ko te roanga o te reo maha |
| p | ko te pitch | dm | ko te diameter o nga rawa ka ine |
| ds | ko te diameter weld | e | ko te roa te rahinga e pa ana ki te whakapiri |
| w3 | ko te whanui o roto i te weld | w2 | ko te whanui o waho i runga i te weld |
Ripanga 1: mekameka whakaneke / rahi hono (mm)
| Nominal size dn | Material diamaketolerance | Pitch | Width | Gauge length of 11 x pn | Wtawhito diamake ds max. | |||
|
pn |
tolerance1) | internal w3 min. | external w2 max. |
l |
tolerance1) | |||
| 4 | ± 0.2 | 12 | 0.25 | 4.8 | 13.6 | 132 | 0.6 | 4.3 |
| 5 | ± 0.2 | 15 | 0.3 | 6.0 | 17.0 | 165 | 0.8 | 5.4 |
| 6 | ± 0.2 | 18 | 0.35 | 7.2 | 20.4 | 198 | 1.0 | 6.5 |
| 7 | ± 0.3 | 21 | 0.4 | 8.4 | 23.8 | 231 | 1.1 | 7.6 |
| 8 | ± 0.3 | 24 | 0.5 | 9.6 | 27.2 | 264 | 1.3 | 8.6 |
| 9 | ± 0.4 | 27 | 0.5 | 10.8 | 30.6 | 297 | 1.4 | 9.7 |
| 10 | ± 0.4 | 30 | 0.6 | 12.0 | 34.0 | 330 | 1.6 | 10.8 |
| 11 | ± 0.4 | 33 | 0.6 | 13.2 | 37.4 | 363 | 1.7 | 11.9 |
| 12 | ± 0.5 | 36 | 0.7 | 14.4 | 40.8 | 396 | 1.9 | 13.0 |
| 13 | ± 0.5 | 39 | 0.8 | 15.6 | 44.2 | 429 | 2.1 | 14.0 |
| 14 | ± 0.6 | 42 | 0.8 | 16.8 | 47.6 | 462 | 2.2 | 15.1 |
| 16 | ± 0.6 | 48 | 0.9 | 19.2 | 54.4 | 528 | 2.5 | 17.3 |
| 18 | ± 0.9 | 54 | 1.0 | 21.6 | 61.2 | 594 | 2.9 | 19.4 |
| 20 | ± 1.0 | 60 | 1.2 | 24.0 | 68.0 | 660 | 3.2 | 21.6 |
| 22 | ± 1.1 | 66 | 1.3 | 26.4 | 74.8 | 726 | 3.5 | 23.8 |
| 1) These tolerances are usually divided into + 2/3 and – 1/3 for both the individual link and thestandard gauge length. | ||||||||
Ripanga 2: te tepe kawenga mahi o te mekameka (WLL)
| Nominal size dn mm | Chain type T t | Chain type DAT t | Chain type DT t |
| 4 5 6 | 0.5 0.8 1.1 | 0.4 0.63 0.9 | 0.25 0.4 0.56 |
| 7 8 9 | 1.5 2 2.5 | 1.2 1.6 2 | 0.75 1 1.25 |
| 10 11 12 | 3.2 3.8 4.5 | 2.5 3 3.6 | 1.6 1.9 2.2 |
| 13 14 16 | 5.3 6 8 | 4.2 5 6.3 | 2.6 3 4 |
| 18 20 22 | 10 12.5 15 | 8 10 12.5 | 5 6.3 7.5 |
| mean stress N/mm2 | 200 | 160 | 100 |
Ripanga 3: te hanga mekameka whakaneke i nga mana tohu me nga kaha pakaru
| Nominal size dn mm | Manufacturing proof force (MPF) kN mi roto. | Breaking force (BF) kN mi roto. |
| 4 | 12.6 | 20.1 |
| 5 | 19.6 | 31.4 |
| 6 | 28.3 | 45.2 |
| 7 | 38.5 | 61.6 |
| 8 | 50.3 | 80.4 |
| 9 | 63.6 | 102 |
| 10 | 78.5 | 126 |
| 11 | 95 | 152 |
| 12 | 113 | 181 |
| 13 | 133 | 212 |
| 14 | 154 | 246 |
| 16 | 201 | 322 |
| 18 | 254 | 407 |
| 20 | 314 | 503 |
| 22 | 380 | 608 |
Ripanga 4: te whakaroa mutunga me te pakeke o te mata
|
| hokist chain types | ||
| T | DAT | DT | |
| Total ultimate whakaroan A%min | 10 | 10 | 5 |
| Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
